Preferences Confirmed

Part Number:

Thank you.

We have updated your email preferences.


Return to the homepage

Preference Center

Part Number:

Let us know what type of content you'd like to receive from us.


We want to stay in touch with you, but communication is a two-way street. Please select from the options below the type of content you’d like to receive:



Part Number:

Dear Partner,

As a valued customer of PAC and GDX, we wanted to personally reach out and thank you for your trust in us to keep you, your employees and your facilities safe.

In the spirit of safety and security, we wanted to share with you what we are doing to limit risks for our employees, customers and partners related to the novel coronavirus (COVID-19). We continue to actively and effectively manage our businesses in response to COVID-19, with three key objectives in mind:

1. Keeping our employees and their families safe.
2. Ensuring our business is fully operational to serve customers.
3. Doing our part as a corporate citizen to contain the spread of the virus.

To provide a healthy work environment and prevent the spread of COVID-19, we have instituted global and regional travel restrictions. We are encouraging employees to hold group meetings virtually, and we are continuing to emphasize WHO and CDC guidelines for personal prevention techniques and travel guidance.

We continue to monitor this situation closely, and we are committed to ensuring our core operations and business remain fully operational and ready to serve you.

To maintain business continuity for our partners and their end users, we are closely monitoring the impact the current situation may have on our suppliers. It has been “all hands-on deck” across our company to mitigate the Coronavirus impact to our supply chain with daily pulses including our executive leadership team. We have taken action in the form of forward buys in our supply chain to mitigate any potential risk.

We will continue to communicate to you in the coming weeks.

Thank you again for your business. We appreciate your trust in us and look forward to continuing to serve you.


Gary Rowden, VP of Sales, PAC & GDX and Brad McMullen, General Manager

Why choose PAC & GDX for your access control and door entry solutions?

Part Number:

Our two brands have a combined 70 years in the business, so we must be doing something right!


You only have to look at our Credentials:




  • Lifetime product guarantees for our readers and IDs
  • Support for all our products – even those over 20 years old
  • Long term customer base





  • Part of a large organisation with access to global technical excellence
  • New video and AI related solutions recently added to our portfolio
  • Continued research and development of new exciting products



Service Excellence

Service Excellence

  • We deliver on time
  • Experienced tech support and customer services teams ready to help
  • Quick resolution to queries



Technical Expertise

Technical Expertise

  • Our Tech Support Teams consists of qualified engineers
  • On average, calls to Tech Support team are resolved in under 5 minutes
  • We are used to working in the most demanding environments



UK Manufactured

UK Manufactured

  • Products are designed and manufactured in UK
  • ISO certified manufacturing facility
  • Reduced carbon footprint



Contact Us

Part Number:

Contact Details:  

1 Park Gate Close

Customer Services:

T: +44 (0) 161 406 3400
F: +44 (0) 161 406 8984
E: This email address is being protected from spambots. You need JavaScript enabled to view it.

Marketing related queries:
This email address is being protected from spambots. You need JavaScript enabled to view it.

Technical Support:

United Kingdom
T: +44 (0) 161 406 3400, opt.2
F: +44 (0) 161 406 8984

T: +44 (0) 161 430 1340
F: +44 (0) 161 406 8984

E: This email address is being protected from spambots. You need JavaScript enabled to view it.

CSV download

Part Number:

Login Form

Lead Capture Success

Part Number:

Thank You

Thank you for contacting us.

We will contact you as soon as possible

3xLOGIC Manuals

Part Number:

  • Manual 1
  • Manual 2

Legacy Manuals

Part Number:

Central Network Controller (CNC)

Easikey 99

EasiKey 1000

EasiKey 1000N

EasiKey Manager





PAC 2000AM

  • No files

PAC 2100

PAC 2200

PAC 6000

  • No files

PAC for Windows 

PAC Vision


Part Number:


We’re proud to announce that our sister company 3xLOGIC’s VIGIL video products and solutions is available through the PAC & GDX portfolio.



Data has changed our lives, the way we communicate, the way we interact.

It's also transformed the way we look after the things we care about; like our assets, our businesses and our future. But data is nothing without insight. And insight is nothing without action.

For over 15 years, 3xLOGIC has been empowering end-users to optimize business intelligence by uncovering valuable insights throughout their organization. Our fully integrated solutions portfolio includes: Cloud-based access control; Video surveillance; and Business intelligence software powered by Artificial Intelligence.

3xLOGIC makes sense out of the disparate data sets organizations are continually collecting across their security universe. By designing solutions that are highly cost-effective, easy to install, easy to use and scalable, we appeal directly to the end-user while also satisfying our integrator partners’ top priority to act as trusted, high-value strategic partner.

Learn more about 3xLOGIC products and solutions and
how they can benefit the integrator and end user at

Contact Success

Part Number:

Thank You

Thank you for contacting us.

We will contact you as soon as possible

STANLEY InfinitePlay

Part Number:

ip stanley logoinfiniteplayInfinitePlay is a 100% IP based plug and play system that doesn’t require sophisticated networking knowledge, ensuring all security installers and electrical contractors can readily fit it as a new standalone system or add it to an existing IP based door entry system for a cost-effective extension option.

Running over an IP network means there are no limits to the distances between system components and no limit to the number of devices that can be incorporated within the system. As a result, InfinitePlay is extremely versatile and can be used on a single residence or a large apartment block right the way through to substantial public and commercial multi site applications, including hospitals, offices, schools etc.

Key components to the InfinitePlay system include a stylish wall mounted 7” touch- screen LCD monitor built on the Android operating system and a choice of good quality, vandal resistant entry panels with a choice variety of finishes to match a building’s design style.

More Info | View Brochure


  • 5 mpx video camera for high resolution images and superb contrast in all lighting conditions
  • 4 high-efficiency LEDs for night-time illumination
  • RJ45 connector with PoE power supply
  • Dimensions 262 x 95 mm, only 19 mm thick
  • No special back boxes required. (The Entrance Panel can be installed in standard vertical 3-module back boxes or round back boxes
  • Visitor detection sensor
  • Optional rain cover surround
  • Various aesthetic finishes
  • The Entrance Panel can be installed using most commercial back boxes


Click on the links below to see InfinitePlay in action.
These short videos explain the functionality and multiple applications of these high-tech IP based video door entry systems.


Part Number:

The new PAC Product Catalogue is out. Click here to view.

Book Training

Part Number:

To book a course or check availability please contact our Customer Services team at:

Tel: +44 (0)161 406 3400

Fax: +44 (0)161 406 8984

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Terms and Conditions

Part Number:

1. General 


1.1 All orders are accepted and offers are made subject to the following terms and conditions which shall form part of and govern the contract of sale.

1.2 In these terms and conditions the seller means Stanley Security Products, which is a sales channel of Stanley Security Solutions Limited. The buyer means the party to whom this document is addressed and these conditions mean these terms and conditions.

1.3 These conditions apply in preference to and supersede any conditions referred to or offered by the buyer whether in negotiation or at any stage in the dealings between the seller and buyer with reference to the goods (which expression shall include software or firmware) to which this contract relates. Without prejudice to the generality of the foregoing, the seller will not be bound by any standard or printed terms furnished by the buyer in any of its documents, unless the buyer specifically states in writing separately from such terms that it intends such terms to apply and the seller specifically agrees to such notification in writing 

1.4 Neither the buyer nor the seller shall be bound by any variation, waiver of, or addition to these conditions except as agreed by both parties in writing and signed on their behalf.

2. Quotations and Orders

2.1 The placing of an order following the seller’s quotation shall not be binding on the seller unless and until accepted by the seller in writing. If an order is not made in writing it must forthwith be confirmed in writing.

2.2 An order accepted by the seller may only be cancelled or varied with the seller’s consent: the giving of the seller’s consent shall not in any way prejudice the seller’s right to recover from the buyer full compensation for any loss or expense arising from such cancellation or variation. The following scale of charges shall apply to all orders cancelled by the buyer.

No. of days before acknowledged delivery date Cancellation Charge (% of order value)
More than 28 days 10%
15-28 days 15%
6-14 days. 20%
Less than 5 days 25%

2.3 Additions or alterations to orders, however made, shall not be binding on the seller until they have been confirmed by the seller in writing. Any such addition or alteration not made in writing must forthwith be confirmed in writing. 

3. Prices 

3.1 Unless otherwise specifically agreed by the seller, all prices quoted are in pounds sterling.

3.2 The prices quoted are based on current conditions and are subject to variation or revision by the seller prior to its acceptance of an order without notice. The goods will be invoiced at the price ruling on the date of acceptance of an order.

3.3 UK prices quoted are exclusive of Value Added Tax, carriage and packing, which shall be charged extra, unless otherwise specifically stated in the contract. Export prices are ex-works, unless otherwise specifically agreed by the seller. Any variation to prices resulting from taxes or levies will be for the buyer’s account. 

4. Delivery 

4.1 Where goods are ordered by the buyer for delivery at his request:-
(i) if a period is stated for delivery and such is not extended by agreement in writing the buyer shall take delivery within that period;
(ii) if no period is stated for delivery, the buyer shall take delivery of the goods as soon as they are ready;
(iii) if the buyer does not take delivery of the goods within the period the buyer will reimburse the seller’s storage and insurance costs. An invoice will be issued for the full amount of the goods plus the storage costs on the last date on which delivery is due and shall be payable in accordance with the provisions of Clause 13.1. 

4.2 In any other case:-
(i) any time stated in respect of delivery is given in good faith but it is by way of estimation only and is not binding on the seller; (ii) time for delivery, whether expressly stated or not, shall not be or be deemed to be of the essence of the contract of sale. 

4.3 If the seller has agreed to deliver the goods, it will do so as near as possible to the delivery address as a safe hard road permits. The buyer shall provide at his own expense the labour for unloading and stacking. The buyer shall unload with utmost despatch. Damage caused to the goods due to inadequate site access or careless unloading shall be the buyer’s responsibility. 

4.4 The seller shall be entitled to make partial delivery of the goods unless otherwise agreed in writing.
4.5 In case of partial delivery of goods the buyer will not be entitled to treat the delivery of faulty goods in any one partial delivery or the late delivery of any partial delivery as a repudiation of the 

whole contract. 

5. Packing, Consignment and Carriage 

Unless otherwise stated in the contract, the goods will be consigned by the method of transport chosen by the seller to the delivery address specified by the buyer for consignment of the goods 

(‘delivery address’) or, where the delivery address is not within the United Kingdom, ex works. 

6. Defects After Delivery – Physical Condition 

6.1 The seller warrants the physical condition of goods supplied by it (as opposed to any software or firmware contained in or included with those goods) on the terms contained in this Clause 6.1 (subject always to the extensions of time, restrictions and limitations contained in this Clause 6 and elsewhere in these conditions). The seller will make good, by repair or (at the seller’s option) by the supply of a replacement, defects in physical condition (including failure of any electronic component) which under proper use appear in such goods as are of the seller’s manufacture or assembly (including manufacture or assembly by a third party pursuant to a contract with the seller for such manufacture or assembly) and are notified to the seller within a period of one year after the goods have been delivered and arise solely from faulty design, materials or workmanship. In the case of the non-functioning of magnetic stripe identification cards this warranty shall exclude electro-magnetic damage and wear and tear caused by the user. 

6.2 Identification cards and tokens – warranty extension
a) In the case of the non-functioning of any proximity identification card, key or token, the duration of the warranty in clause 6.1 shall be extended to a period unlimited in time, but only for defects caused by a failure of any electronic component in such goods.
b) Readers- warranty extension
In the case only of proximity technology readers, the duration of the warranty in Clause 6.1 shall be extended to a period unlimited in time, but only for defects caused by a failure of any electronic component in such goods. 

6.3 Access control equipment - warranty extensions
In the case only of goods consisting of other hardware manufactured by the seller and intended for use as access control equipment, the warranty period in Clause 6.1 shall be extended to five years, but only for defects notified during that period consisting of the failure of any electronic component in such goods. 

6.4 Connection to approved equipment 

In any case the warranty in clause 6.1 shall only apply to goods connected to or configured to work with equipment specified in product literature, documentation or other specification document 

published by the seller.
6.5 Notification or defective goods and carriage to the seller 

In any case, for the warranty in Clause 6.1 to apply the claim under this warranty must be notified to the seller as soon as the buyer is aware of it and the defective goods (or part thereof) must 

promptly be returned by the buyer carriage paid to the seller’s works and (if replaced) shall become the property of the seller.
6.6 For the avoidance of doubt, a list is available from the seller's Customer Services department that states which warranty period (and any other specific conditions) applies to which of the goods 

supplied by the seller from time to time. The buyer is advised to refer to this list as it identifies conclusively the warranty period and any other conditions applicable to such goods. 

7 Defects after Delivery – Software and Firmware 

.1 The seller warrants the software or firmware contained in or included with any goods to which Clause 6.1 applies (as opposed to the physical condition of those goods) on the terms contained in this Clause 7.1 (subject always to the restrictions and limitations contained in this Clause 7 and elsewhere in these conditions). The seller warrants that any such software or firmware that it has created or developed is substantially in accordance with any specification or product description supplied by the seller with such goods. 

.2 Clause 7.1 is subject to the following limitations, variations and qualifications:
a) It is not warranted that any software or firmware to which Clause 7.1 applies will be free of bugs or reported issues.
b) For the avoidance of doubt, the warranty contained in Clause 7.1 does not apply to any other software or firmware contained in or included with goods supplied by the seller or to any goods other 

than those to which Clause 6.1 applies.
c) In any case, for the warranty in Clause 7.1 to apply, the seller must be notified in writing of the fault in the software or firmware within 90 days after the relevant goods have been delivered and 

the software or firmware in question must promptly be returned by the buyer carriage paid to the seller’s works and (if replaced) shall become the property of the seller.
7.3 If the seller is in breach of the warranty in Clause 7.1, its only liability is to make the software or firmware in question comply with the warranty, by supply of a fix or (at the seller’s option) 

replacement or upgraded software or firmware. 

8. Third Party Warranties 

The seller will use all reasonable endeavours to procure for the buyer the benefit of such warranties and other rights as are conferred on the seller in relation to defects in a) the physical condition of such goods or parts of the goods as are not of the seller’s manufacture or assembly; and b) any software or firmware contained in or included with any goods to which the warranty in clause 7.1 does not apply by the terms of the seller’s agreement with the suppliers of the goods or the software or firmware in question. However, the seller shall have no other responsibility or liability in regard of any of these matters and, in particular, the buyer shall be responsible for all carriage, investigation and other costs and charges. 

9. Limitations of Liability 

9.1 These terms and conditions set out the seller’s entire liability in respect of the goods, or the supply of software, firmware or any service and the seller’s liability hereunder shall be in lieu and to the exclusion of all other warranties, conditions, terms and liabilities express or implied, statutory or otherwise howsoever except any implied by law or statute that cannot be excluded (in which case they are excluded to the maximum extent permitted by law or statute). Save as provided in these terms and conditions and except as aforesaid the seller shall not be under any liability, whether in contract, tort or otherwise, in respect of defects in the goods or any software, firmware or any service or failure to correspond to specification or sample or for any damage, cost, expense or loss resulting from such defects or from any work done in connection therewith or for any breach or non-performance of this contract of any nature whatsoever and howsoever caused. 

.2 The seller’s liability (if any) whether in contract tort or otherwise in respect of any defect in the goods or any software, firmware or service, or for any breach of this contract or of any duty owed to the buyer in connection herewith, shall be further limited for any claim or series of claims arising from the same cause in the aggregate to the greater of the price invoiced by the seller for the goods, software, firmware or service in question and £5,000. 

.3 Nothing in these terms and conditions shall be construed as restricting or excluding in any way the seller’s liability for death or personal injury resulting from its negligence.
.4 The seller shall have no liability for any advice, opinion, guidance, representation or statement made (whether paid for or not, and of whatsoever nature) relating to the goods or any software, 

firmware or service or their installation, use or capabilities.
.5 Notwithstanding any other provision of these conditions (including in particular Clauses 6 and 7) the seller shall have no liability:- 

(i) for any indirect, consequential or economic loss or damage (including, without limitation, loss of revenue, profit, goodwill, business or other opportunity or anticipated savings) whether caused by negligence or otherwise; or 

(ii)if any goods, software or firmware have been altered, repaired or tampered with or (unless specifically approved in the seller’s specifications or literature) connected to or interfaced with any other goods, equipment, system or software. 

9.6 It is acknowledged and agreed that these conditions, and particularly the limitations on liability contained in this Clause 9, are fair and reasonable, having regard to all the circumstances, including the price to be paid and the benefits conferred on the buyer by these conditions (and in particular the warranties given in Clauses 6 and 7). 

10. Transfer of Risk 

Unless otherwise prohibited by law risk in the Goods shall pass to the Buyer upon delivery of the Goods to a courier. 

11. Acceptance of Goods 

11.1 Unless a consumer, the buyer will be deemed to have accepted the goods unless he rejects them within five days after their receipt at the delivery address. 11.2 The seller shall have no liability for goods delivered in a damaged condition or lost in transit or for shortages in delivery unless:- 

(a) in the case of damage or shortage of delivery apparent from visual inspection, details are endorsed by the buyer on the carrier’s delivery note or receipt and notice in writing giving full particulars of the damage or shortage is received by the seller and the carrier within five working days after receipt of the goods at the delivery address and, in the case of damage or shortage of delivery not apparent from visual inspection at the time of such receipt, within twenty working days.
(b) in the case of goods lost in transit, notice in writing of the non-delivery is received by the seller and by the carrier within fourteen days after the date of the advice note or invoice (as the case may be) issued by the seller. 

11.3 If shortage of delivery does take place the buyer undertakes not to reject the goods but to accept the goods delivered as part performance of the contract.
11.4 Subject to the buyer complying with Clauses 11.1 or 11.2 (as the case may be) and subject to Clause 10, the seller shall replace or make good any goods rejected by the buyer or delivered in a 

damaged condition or lost in transit (or, in lieu thereof, at the option of the seller, shall allow credit to the buyer of the amount of the price of goods lost or rejected or a proportionate amount thereof in the case of goods damaged) but the seller shall have no other liability whatsoever (other than liability for death or personal injury due to the seller’s negligence) including consequential loss in respect of goods rejected by the buyer or delivered in a damaged condition or lost in transit. 

12. Site Access and Preparation 

12.1 Where the contract includes the provision of Services by the Seller the Buyer shall ensure that the Seller has all necessary access to the site at which the Services are to be performed and that all necessary facilities and services are available to the Seller to enable the Services to be performed. 

12.2 Where the Services to be performed under this Contract comprise the installation of the Goods or any part thereof the Buyer shall be responsible for ensuring that all preparatory works have been carried out to the site and that all necessary consents, licences, permissions and approvals have been obtained so as to enable the Seller to carry out the services. 

13. Payment 

13.1 Unless otherwise stipulated in the contract payment of the price shall be made in cash on the placing of the buyer’s order or, in any case where the seller has granted credit facilities to the buyer, within 30 days from the date of the seller’s invoice. Unless otherwise specifically agreed by the seller in writing, payment shall be made in sterling.

13.2 Where partial delivery is made, the buyer shall be obliged to pay for each instalment separately, if the seller so requires, by invoicing him.

13.3 If payment is not made on the due date the seller shall be entitled to:-
(i) charge interest on the outstanding amount at the rate of 4% above Barclays Bank plc base rate accruing daily;
(ii) require payment in advance of delivery of any undelivered goods; 
(iii) refuse to make delivery of any undelivered goods whether ordered under the contract or not and without incurring any liability whatever to the buyer for non-delivery or any delay in delivery;
(iv) terminate the contract;
(v) enforce the terms of Clause 15.

13.4 Unless otherwise agreed in writing by the seller the buyer shall not be entitled to exercise any right of set-off or counterclaim against monies owed to the seller for goods invoiced and delivered to him. 

14. Insolvency and your account

14.1 This clause applies if:
14.1.1 the Customer makes a composition or voluntary arrangement with its Creditors or enters into administration or goes into bankruptcy or liquidation or sequestration; or
14.1.2 an encumbrancer takes possession, or a receiver is appointed, over any of the property or assets of the Customer;
14.1.3 the Customer ceases or threatens to cease, or carry on business; or
14.1.4 the Company reasonably apprehends that any of the events mentioned above is about to occur in relation to the Customer and notifies the Customer accordingly upon 7 days written notice then; 

14.2 If this clause applies then, without prejudice to any other right or remedy available to the Company, the Company may cancel the contract or suspend further deliveries under the contract without any liability to the customer, and if the goods have been delivered but not paid for, the price shall become immediately due and payable notwithstanding any previous agreement or arrangement to the contrary and in such prevailing circumstances in clauses 14.1.1 – 14.1.3 above or under such reasonable apprehension by the Company under clause 14.1.4, the Company shall in respect of any rebate arrangement with the Customer exercise its unfettered right to offset any sums due from the Customer against any amount on its accounts receivables ledger by way of credit note under any rebate arrangement, in full or part satisfaction of any sum due to the Company by the Customer.

14.3 In respect of clause 14.1.1 above you the Customer undertake to keep us informed upon written 14 day notice of any event or circumstance that places your business in a precarious financial position which may lead to an administration order bankruptcy or liquidation and we the Company undertake to provide written 7 day notice of our intention to exercise our right
under clause 14.1.2

15. Ownership of Goods

15.1 Subject to the following clauses, the goods shall remain the seller’s property until payment in full of the price, interest charges and all other monies due to the seller under this contract and all other contracts between the seller and buyer, notwithstanding any incorporation of the same into a larger piece of equipment.

15.2 The buyer shall be entitled to sell the goods in the ordinary course of business, provided that the proceeds of the sale shall be held in trust for the seller by the buyer (acting as a fiduciary bailee for this purpose only) until payment of all sums due to the seller by the buyer under this contract and all other contracts between the seller and the buyer.

15.3 Should the buyer default in any payment when due the seller will be entitled to repossess all the goods held by the buyer which are still the seller’s property (without prejudice to any other right or remedy arising out of such default in payment) and for this purpose the seller will be entitled to enter upon any land or buildings on or in which the goods may be situated and to remove the same. All costs incurred by the seller in repossessing the goods shall be borne by the buyer.

15.4 Any goods so repossessed shall be sold and the proceeds of sale set off against the amounts due to the seller by the buyer. Any balance remaining of the proceeds of sale shall be paid to the buyer. If the said proceeds of sale are not sufficient the buyer shall remain liable to pay to the seller the amount remaining due together with any interest accruing thereon.

16. Patents, copyright and other intellectual property

The buyer shall indemnify the seller against all damages penalties costs and expenses to which the seller may be liable as a result of work done in accordance with the buyer’s specification which involves the infringement of any copyright, patent, registered design or any other intellectual property right or duty of confidence.

17. Confidentiality

The buyer shall at all times keep inviolate the secrets and business matters of the seller and of any subsidiary or associated company of whose business they may have knowledge or may acquire knowledge and shall not at any time disclose or permit or enable any person or persons to acquire any of the knowledge possessed or acquired by them or specialised methods of design or processes of manufacture carried out by the seller

18. Software Licence, Copyright etc

.1 Any software whether on tape, disc or other reproductive medium or device supplied as part of or in connection with the goods is supplied by way of a perpetual, non-transferable,
non-exclusive licence to the buyer to use such software only for its own purposes in or in respect of the goods. In this connection the buyer shall at the seller’s request execute and deliver such licence-to-use agreements as are appropriate to such software in such form as the seller shall require. The software supplied may be used to make one copy thereof in printed or machine readable form for retention by the buyer for backup purposes. The buyer acknowledges that the copyright and other intellectual property rights in such software are the property of and shall remain with the seller.

.2 Subject to Clause 18.1 and, to the extent that it is not possible at law to contract out of rights derived from the Copyright (Computer Programs) Regulations 1992 (the "Regulations”), the buyer shall not (and shall not permit any other person to) make any alteration to, decompile, translate, adapt, reverse engineer or tamper with any goods or any software or firmware or any literature or information relating thereto (whether in electronic or printed form). If the buyer intends to attempt the decompilation of any software supplied by the seller for any purpose in the exercise of rights derived under the Regulations, the buyer will first give reasonable notice to the seller of its intentions.

19. Licences

In the case of export orders the buyer shall be responsible for obtaining all and any necessary export licence(s). The buyer is also responsible for obtaining any approvals, licences or permissions necessary for the ownership or use of the products. The seller accepts no liability for any loss, damage or expense arising from any delay in obtaining or failure to obtain such licence, approvals or permissions.

20. Determination of Contract

20.1 If the buyer shall make default in or commit a breach of the contract or any other of his obligations to the seller, or if any distress or execution shall be levied upon the buyer’s property or assets, or if the buyer shall make or offer to make any arrangement or composition with creditors, or commit any act of bankruptcy, or if any petition or receiving order in bankruptcy shall be presented or made against him, or if the buyer is a limited company and any resolution or petition to wind up such a company’s business shall be passed or presented, or if a receiver of such a company’s undertaking, property or assets of any part thereof shall be appointed (or if any similar or equivalent procedure shall apply to the buyer, irrespective of the nature of its establishment or place of establishment), the seller shall have the right by written notice to the buyer to determine this and/or any other contract then subsisting between the buyer and the seller, and/or suspend further deliveries of goods under this and/or any other contract between the buyer and the seller. Such right shall be without prejudice to any other claim or right the seller may otherwise make or exercise.

21. Assignment

21.1 The buyer shall not assign the contract or any benefit under the contract without the consent in writing of the seller, which may if given be on such terms as to guarantee or indemnity or otherwise as the seller thinks fit. However, nothing in this clause shall prevent the Seller from sub contracting the provisions of any Services as it sees fit.

21.2 These conditions and the contract shall be binding upon the seller’s assigns and any successor in business, personal representative or successor by operation of law of the seller.

22. Notices

Notices required to be given to the seller must be in writing and sent by first class post to Stanley House, Bramble Road, Swindon, SN2 8ER, England (or such other address as the seller may from time to time notify). Notices required to be given to the buyer will be sent by first class post to the address specified by the buyer for the consignment of the goods unless a different address is specified for this purpose by the buyer.
Notices shall be deemed to have been delivered on the next business day after the day of posting. In proving service by first class post it shall be necessary to prove that the notice was contained in an envelope which was duly addressed and posted in accordance with this clause.

23. Other Conditions

23.1 (i) Neither party shall be liable to the other for any default hereunder where the same is due to causes beyond the control of the party in default, provided that any party seeking to rely on this provision shall give written notice to the other containing full particulars of the act or matter which it claims has put the due performance of its obligations under the contract beyond its control and provided further, but subject to sub-clause (ii) below, that this sub-clause shall cease to apply when such act or matter has ceased to have effect on the performance of the contract.
(ii) If any act or matter relied upon by either party for the purposes of sub-clause (i) above shall continue for more than six months, the other party shall be entitled to terminate the contract forthwith.

.2 Any waiver or forbearance by the seller of its rights hereunder in respect of any breach by the buyer shall not affect the rights of the seller in the event of a subsequent breach by the buyer. 

.3 The seller may monitor or record for quality control or training purposes any communications with the buyer.

.4 Nothing in these conditions or the contract is intended to confer any benefit on any third party (whether referred to by name, class, description or otherwise) or any right to enforce any term of these conditions or the contract. 

24. Law 

These conditions and the contract shall be subject to and construed in accordance with English Law, and the buyer is deemed to submit to the non-exclusive jurisdiction of the Courts of England and Wales. 


Legal & Privacy

Part Number:

Important Legal Information

This website and its contents from time to time ("Site") are available to users only on the terms appearing below. Stanley Security Solutions Ltd This site belongs to Stanley Security Solutions Ltd, a company registered in England under number 181585 and whose registered office is Stanley House, Bramble Road, Swindon, Wiltshire. SN2 8ER, England ("Stanley Security Solutions"). The legal information appearing below is provided by Stanley Security Solutions for the benefit of Stanley Security Solutions itself and also its officers, employees and agents and affiliates and their officers, employees and agents from time to time.

Company Information

Stanley Security Solutions Ltd. Registered in England and Wales No. 181585 Registered Office for all companies: Stanley House, Bramble Road, Swindon VAT No. for all companies: 232 2446 95

Information and Disclaimers

Stanley Security Solutions uses reasonable care to make sure that the information appearing on this Site is accurate and up-to-date. However, errors and omissions do occur and the information may not be complete or up-to-date. Therefore the user should not take the accuracy of the information for granted. Any specific facts should be checked directly with Stanley Security Solutions . None of the material contained in this Site (nor any omission from it) can be relied upon as a statement or representation of fact, and does not and will not form part of any contract. Stanley Security Solutions has no control over the use to which the information may be put by the user and accordingly shall not be liable for any loss, cost or liability, of whatever nature (including, without limitation, any loss of profits or opportunity or direct, indirect or consequential loss or damage) arising out of or in connection with use of such information.The statutory rights of a customer dealing with Stanley Security Solutions as a consumer are unaffected.

Hypertext Links

Stanley Security Solutions cannot and has not reviewed all of the sites linked on this Site, and shall not be liable for their content. Users link to other sites at their own risk and use such sites according to the terms and conditions of use of such sites.

Transmitted Material

Any material or information transmitted to or posted to this Site by users will be treated as non-confidential and non-proprietary and may be disclosed or disseminated or stored or used by Stanley Security Solutions for any purpose whatsoever including but not limited to developing, manufacturing and selling software and products. Do not post or transmit to or from this Site any unlawful, defamatory, obscene, scandalous, inflammatory, pornographic or offensive or damaging material (including, without limitation, any computer "virus") or any other material which could give rise to any civil or criminal liability in the territory to which this Site relates.


Stanley Security Solutions uses reasonable care to ensure that it does not create, replicate or transfer any computer viruses. However, viruses unfortunately exist, they are not always easy to identify and new and previously unknown viruses are continually being created and transferred. Accordingly, no guarantee can be given that this website and any software, email or program from Stanley Security Solutions is virus free. Users and recipients are advised to take their own precautions as Stanley Security Solutions accepts no liability in this regard.


Stanley Security Solutions gives permission to copy materials appearing on this Site and any related graphics provided that any such copies are only used inStanley Security Solutions commercial interests and the copyright notice shown below appears in all copies. This permission may be withdrawn at any time and for any reason. © Stanley Security Solutions Ltd. 1999-2000 Where third party material appearing in this Site is used, copied or repeated the prior written consent of the owner of the copyright in that material must be obtained and the copyright notice pertaining to that third party material must appear on all copies.


The trade marks and logos ("Trademarks") used and displayed on this Site are registered and unregistered trademarks of Stanley Security Solutions and others and may not be used in any advertising or other publicity materials in relation to the display of any information or materials obtained from this Site without the prior written consent of the Trademark owner.

Data Protection Act 1998

The Stanley Security Solutions Europe Group of companies regard the lawful and correct treatment of any personal information as very important, not only for our own efficient operations but to maintaining the confidence of those with whom we deal. We therefore fully endorse and adhere to the legal obligations and principles of the Data Protection Act 1998.We will only use the information you provide to us on this form in order to identify and inform you about our products and future promotions which maybe of interest to you. By completing these details you agree that we can contact you to advise you of such matters, however you can contact us on 01793 412224 at any time to request that we no longer send you this type of information.Any information you give us will be held securely and not disclosed to anyone outside of the Stanley Security Solutions Europe Group or used for any purpose other than as stated above.

Your Rights

You have the right to request (on payment of a fee) copies of personal records about you, which are held by us along with details of whom we may have supplied the information to and from whom we have received information about you. We can supply a form for you to submit such a request, which is obtainable from the Company's Data Protection Officer at the Stanley Security Solutions Europe Groups registered office.

Cookies Policy

Last updated: 20/09/2017

PAC GDX uses cookies on (the "Service"). By using the Service, you consent to the use of cookies.

Our Cookies Policy explains what cookies are, how we use cookies, how third parties we may partner with may use cookies on the Service, your choices regarding cookies and further information about cookies.

What are cookies

Cookies are small pieces of text sent by your web browser by a website you visit. A cookie file is stored in your web browser and allows the Service or a third party to recognize you and make your next visit easier and the Service more useful to you.

Cookies can be "persistent" or "session" cookies.

How PAC GDX uses cookies

When you use and access the Service, we may place a number of cookies files in your web browser.

We use cookies for the following purposes: to enable certain functions of the Service, to provide analytics, to store your preferences.

We use both session and persistent cookies on the Service and we use different types of cookies to run the Service:

- Essential cookies. We may use essential cookies to authenticate users and prevent fraudulent use of user accounts.

Third party cookies

In addition to our own cookies, we may also use various third parties cookies to report usage statistics of the Service, deliver advertisements on and through the Service, and so on.

What are your choices regarding cookies

If you'd like to delete cookies or instruct your web browser to delete or refuse cookies, please visit the help pages of your web browser.

Please note, however, that if you delete cookies or refuse to accept them, you might not be able to use all of the features we offer, you may not be able to store your preferences, and some of our pages might not display properly.

Where can you find more information about cookies

You can learn more about cookies and the following third party websites:


Network Advertising Initiative:


Part Number:

PAC and GDX’s development, manufacturing, customer and technical support teams are all based in the UK to ensure the best possible quality of products and support. Our innovative approach and attention to detail have enabled us to design solutions that not only deliver on their promise of flexibility and reliability, but also challenge the market and continuously raise the standard of access control, door entry and security.

With products developed around our customers’ needs and the ever-changing requirements and legislation of the access control and door entry markets, PAC and GDX provide a robust functionality that meets these rigorous demands within the residential, education and commercial sectors.

PAC and GDX’s versatile and scalable solutions are suitable for any application and environment. From a single door installation to a fully integrated global web-based system, our extensive product portfolio exceeds expectations. Our offering fully embraces the concept of highly secure premises and includes a whole range of readers, controllers, door entry panels, handsets and management options which can be integrated with CCTV, Time and Attendance, Intruder and Staff Protection systems.


Our Innovative Brands

PAC & GDX are part of a portfolio comprising of five trusted, market-tested brands: PAC, GDX, 3xLOGIC, PACOM and Sonitrol, which have a combined legacy of over 100 years in the security industry. Driven by constant innovation to meet continuously evolving physical and cyber threats, our solutions provide unparalleled quality of products and services to protect people, property and assets.

Each of the five sister companies brings unique, market-tested core competencies and products to the entire group:



During the last 40+ years PAC™ has earned a reputation as the market leader in the development and manufacture of cutting-edge end to end access control solutions that are scalable, easy to install and maintain.  Our offering includes readers, controllers, ID devices and management solutions, which can be integrated with door entry, video surveillance, time and attendance, intruder and staff protection systems.



GDX™ has 35+ years’ experience producing door entry systems providing unbeatable reliability and robust functionality that meet the rigorous demands of residential and commercial sectors.  Offering a full range of pre-sales design, specification, technical and site survey support, GDX plays a vital role in protecting our customers’ people, property and assets.



3xLOGIC Inc. has been a leading innovator in server and cloud-based security technology for 15+ years. The company is recognized for providing easy-to-use surveillance and business intelligence solutions that seamlessly integrate video, access control, alarm audio and video verification, and disparate data sets such as ATM, Point-of-Sale, analytics, and more.

Visit 3xLOGIC:


PACOM Systems designs, develops and manufactures industry-leading security platforms for enterprise multi-site and campus environments integrating hardware and software into a single solution. With more than 36 years of experience and a proven track record of innovation across different sectors and geographies, PACOM protects vital assets and makes security management easier.  Operating on a global basis, PACOM has offices in Australia, USA, United Kingdom, France, Spain, and Sweden.

Visit PACOM:



Sonitrol was founded by a police officer in 1964 in Anderson, IN who was tired of responding to false alarms. With the help of an inventor, they created the same audio verification technology that is used today. Sonitrol is the leader in verified electronic security, offering Intrusion Detection, Access Control, Video Surveillance and Fire Monitoring. Sonitrol provides for some of the fastest police response times, lowest false alarm rates and the best apprehension record, over 179,698, in the security industry. This year, twelve Sonitrol franchises business made the SDM Top 100 list.

Visit Sonitrol:


What sets us apart?

1. We leverage an international team of engineers in multiple locations to innovate a constant stream of world-class products.
2. By operating with that “local feeling,” we demonstrate our commitment to superior customer service.
3. Our industry-leading training programs, on-site and online, effectively differentiates us from the competition.
4. A management team of thought leaders with a combined 100+ years of experience stands behind the innovation of multiple product lines for every vertical


Part Number:

World Class Security Products

PAC™ & GDX™ have over 70 years combined experience in developing and manufacturing robust, versatile and scalable security solutions, suited for any application and environment that are easy to install and maintain. The offering includes a range of access control, door entry and management solutions, which can be integrated with video surveillance, time and attendance, intruder and staff protection systems.

Contact our dedicated customer services team on:

+44 (0) 161 406 3400

Find out how you can start benefiting from a tailored PAC or GDX system that exceeds your expectations and requirements.